First Time Installation - Hitachi L26VG07U Instruction Manual

First Time Installation

IMPORTANT: Ensure that the aerial is
connected before switching on the TV for the  rst
time installation.
• When the TV is operated for the  rst time, installation
wizard will guide you through the process. Next,
language selection screen will be displayed:
• Use " " or " " buttons to select your language
and press OK button to set selected language and
continue.
• After selecting the language, "
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
• By pressing " " or " " button, select the country
you want to set and press " " button to highlight
Teletext Language option. Use " " or " " button
to select desired Teletext Language.
• Press " " button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
• Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
15
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
To select the "Yes" or "No" option, highlight the item by
using " " or " " buttons and press OK button.
Afterwards, the following OSD will be displayed on the
screen and the digital television will search for digital
terrestrial TV broadcasts.
Welcome!" screen will
• After all the available stations are stored, Channel
List will be displayed on the screen. If you like
the sort channels, according to the LCN(Logical
Channel Number), please select "Yes" and than
press "OK".
• Press
NOTE: You can press "M" button to cancel.
OK button to quit channel list and watch TV.