Table of Contents
Advertisement
Practical hints
Towing the vehicle
Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
Fit locking tabs of cover under the low-
er edge of the opening in the bumper.
Apply even pressure on the upper part
of the cover until it snaps into place.
Rear of vehicle
2 Cover on right side of rear bumper
424
To remove cover:
Insert flat, blunt object as a lever into
upper left or right recess of cover 2.
Loosen cover 2 using the lever.
Fold cover 2 down in direction of ar-
row to reveal the threaded hole for the
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
Fit cover 2 and snap into place.
Advertisement
Table of Contents
