Instrument cluster submenu
Access the
Inst. cluster
submenu via
the
Settings
menu. Use the
ter
submenu to change the instrument
cluster display settings. The following
functions are available:
Function
Selecting standard display
Selecting speedometer display
mode
Selecting language
Selecting standard display
Move the selection marker with button
æ or ç to the
Inst. clus-
submenu.
Press button j or k repeatedly
until you see this message in the left
multifunction display:
Page
The selection marker is on the current
149
setting.
149
150
Press æ or ç to select the de-
sired setting.
The selected option appears in the left
multifunction display.
The option not selected will appear in
the right multifunction display when
scrolling through the standard display
( page 140).
Selecting speedometer display mode
Move the selection marker with button
æ or ç to the
Inst. cluster
submenu.
Press button j or k repeatedly
until you see this message in the left
Select display
.
multifunction display:
Digital speedometer
The selection marker is on the current
setting.
Press æ or ç to set the speed-
ometer units to
Controls in detail
Control system
Inst. cluster
.
Kilometres
or
Miles
.
149