Table of Contents
Advertisement
Vehicle status messages have been
recorded
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the right multifunc-
tion display:
1 Number of recorded status messages
Press button k or j.
The stored messages will now be dis-
played in the order in which they have
occurred. For malfunction and warning
messages, see "Vehicle status messag-
es in the multifunction display"
( page 345).
i
After you have scrolled through all re-
corded status messages, the first re-
corded message appears again.
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display
when the SmartKey in the starter
switch is turned to position 0 or re-
moved from the starter switch
or
when you turn off the engine by press-
ing the KEYLESS-GO* start/stop but-
ton on the gear selector lever once and
open the driver's door (this puts the
starter switch in position 0, same as
with the SmartKey removed from the
starter switch)
Controls in detail
Control system
i
The vehicle status message memory
will be cleared when you then turn the
SmartKey in the starter switch to posi-
tion 1 or 2, or when you press the
KEYLESS-GO* start/stop button once
or twice without depressing the brake
pedal. You will then only see high prior-
ity messages in the multifunction dis-
play ( page 345).
145
Advertisement
Table of Contents
