Table of Contents
Advertisement
Submenus in the Settings menu
Press button j.
In the right multifunction display you
see the collection of submenus.
Press button ç.
The selection marker moves to the next
submenu.
The submenus are arranged by hierarchy.
Scroll down with the ç button, scroll up
with the æ button.
With the selection marker on the desired
submenu, use the j button to access
the individual functions within that sub-
menu. Once within the submenu, you can
use the j button to move to the next
function or the k button to move to the
previous function within that submenu.
The actual settings are made with button
æ or ç.
Controls in detail
Control system
Resetting the functions of a submenu
For each submenu you can reset all the
functions to the factory settings.
Move to a function in the submenu.
Press the reset button in the instru-
ment cluster for approximately
3 seconds.
In the right multifunction display you
will see the request to press the reset
button again to confirm.
Press the reset button again.
All functions of the submenu will reset
to factory settings.
147
Advertisement
Table of Contents
