Mercedes-Benz 2006 E -Class Wagon Operator's Manual page 422

E-class wagon
Table of Contents

Advertisement

Vehicle tool kit (vehicles with TIREFIT)
1 Vehicle tool kit and jack
2 Electric air pump
3 TIREFIT kit
Vehicle jack
Warning!
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use,
especially on hills. Always try to use the jack
on level surface. Make sure the jack arm is
fully seated in the jack take-up bracket.
Always lower the vehicle onto sufficient
capacity jackstands before working under
the vehicle.
Where will I find ...?
The vehicle jack is located in the cargo
compartment underneath the third row
G
seat cushions and footwell ( page 420) or
underneath the cargo compartment floor
( page 419).
Storage position
Remove vehicle jack from its
compartment.
Turn crank handle in direction of arrow
as far as it will go.
Practical hints
421

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E 350E 350 4maticE 500 4maticE 55 amg

Table of Contents