Mercedes-Benz 2006 E -Class Wagon Operator's Manual page 139

Controls in detail
Seats
Pull release handle 1 and fold seat
backrest for the folding bench seat up-
ward.
3 Mountings for seat belts
Hook seat belts into mountings 3.
Pull release handle 2 and fold seat
cushion for the folding bench seat into
sitting position.
Press seat cushion as far down as it will
go.
The backrest will then also engage
properly.
Fold head restraints into upright posi-
tion.
138
Removing and installing seat cushions
i
You must remove the seat cushion
when you want to raise the loading
floor, e.g. in the event of a flat tire.
Removing
1 Seat guides
2 Seat cushion
Fold seat cushion 2 upward and re-
move it from seat guides 1.
Installing
Insert seat cushion 2 into seat guides
1 from behind 3 at a slight angle.
Fold seat cushion 2 back into original
position 4 until it engages.