Mercedes-Benz 2006 E -Class Wagon Operator's Manual page 183

Controls in detail
Control system
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle's electronic system, pos-
sibly resulting in an accident and/or
personal injury.
You can use the functions in the
to operate your telephone, provided it is
connected to a hands-free system and
switched on.
Switch on the telephone and COMAND.
Press button ÿ or è on the
steering wheel repeatedly until the
menu appears in the multifunction dis-
play.
Which messages will appear in the multi-
function display depends on whether your
telephone is switched on or off:
If the telephone is off, the message in
the multifunction display is:
182
If the telephone is on:
The telephone will then search for a
network. During this time the multi-
function display is empty.
As soon as the telephone has found a
network, READY
Tel menu
function display.
Tel
This standby message indicates that your
telephone is ready for use and you can op-
erate it using the control system.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
PHONE off .
the multifunction display you will then see
the message:
appears in the multi-
Ending a call
Press button s.
You have answered the call. In the mul-
tifunction display you see the length of
the call.
i
If you do not wish to accept a call,
press button t.
Press button t.
You have ended the call. In the multi-
function display you will again see the
standby message.