Mercedes-Benz 2006 E -Class Wagon Operator's Manual page 132

Head restraint height
(rear outer seats only)
1 Release button
Raising:
Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button 1 and pull the
head restraint out.
Lowering:
To lower the head restraint, push
release button 1 and push down on
the head restraint.
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head
restraint supports the back of the head at
eye level. This will reduce the potential for
injury to the head and neck in the event of
an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
Controls in detail
Head restraint tilt
(rear outer seats only)
Two different head restraint angle
positions are available.
G
1 Release button
Press the release button 1 and tilt the
head restraint to the desired position.
Seats
131