Yardworks 54-5701-4 Owner's Manual page 9

ASSEMBLY
CONNECTING THE POLES
Before using the pole saw, assembly is required. When removed from the box, there are the three poles as shown above.
Remove packaging material from cord and discard.

Insert the intermediate pole into the handle pole and slide together . The tubes are egg-shaped and will only install one

way.
Lower the collar on the intermediate pole to the threaded base on the handle pole and rotate clockwise to secure.

Repeat this process to attach the intermediate pole to the powerhead pole.

WARNING:
Failure to lock powerhead pole as directed above could result in serious injury or death.
THREADED BASE
(See Figure 2.)
HANDLE POLE
INTERMEDIATE POLE
POWERHEAD POLE
COLLAR
THREADED BASE
9
COLLAR
Fig. 2