Yardworks 54-5701-4 Owner's Manual page 18

THE BATTERY CHARGER
MOUNTING THE CHARGER
(See Figure 13.)
WALL-MOUNTABLE
The charger features a key-hole hanging feature for convenient storage. Screws should be installed so that the centre
distance is 3 5/32" (8 cm). Use proper wall fasteners to accommodate the combined weight of the charger and the battery
pack (approximately 3 1/2 lb [1.6 kg])
CORD WRAP
The charger is equipped with a cord wrap that is located at the rear of the unit. Use this feature to minimize workspace
clutter and hazards.
Fig. 13
18