In-Line Solution Filter Assembly - Minuteman E26ECO User Manual

Machine Overview

In-Line Solution Filter Assembly

The solution solenoid, which shuts off solution flow when the bail handle is released, is protected from debris by the in-line filter assembly. The
filter assembly is located at the rear of the machine on the left hand side, just under the solution tank. It is important to check and clean the
screened washer inside the assembly regularly to ensure proper solution flow. To open, unscrew the assembly (Note that the cone of the
washer is facing out toward the rear of the machine). Remove washer and rinse, reinsert and screw assembly together, tightening by hand.
Overtightening with tools may damage the plastic threads.
A Fitting, MGHT
B Screened Washer
C Hose Barb Insert
D Fitting, FGHT
22
A B C
D