Mercedes-Benz 2005 C 230 Kompressor Operator's Manual page 390

Left headlamp, mirror-image of right
headlamp
1 Housing cover for Bi-Xenon headlamp
2 Housing cover for high beam flasher,
parking and standing lamp
3 Bulb socket for turn signal lamp
4 Bulb holder for high beam flasher
5 Bulb socket for parking and standing
lamp bulb
High beam bulb for high beam flasher
Turn housing cover 2 counterclock-
wise and remove it.
Turn bulb holder 4 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 4.
Insert the new bulb so that its socket
locates in the recess of bulb holder 4
and is level to it.
Practical hints
Replacing bulbs
Reinsert bulb holder 4 with the bulb in
the lamp and turn clockwise.
Align housing cover 2 and turn it
clockwise.
Front turn signal lamp bulb
Turn bulb socket 3 with the bulb
counterclockwise and remove it.
Press gently onto the bulb and turn
counterclockwise out of bulb
socket 3.
Press the new bulb gently into bulb
socket 3 and turn clockwise until it
engages.
Place bulb socket 3 back into the
lamp and turn it clockwise.
389