Controls in detail
Control system
Setting night security illumination
(Headlamps delayed shut off)
Use this function to set whether and how
long you would like the exterior lamps to il-
luminate during darkness after exiting the
vehicle and all doors closed.
With the delayed shut-off feature activated
and the exterior lamp switch in
position U before the engine is turned
off, the following lamps will come on after
you have removed the SmartKey from the
starter switch:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
Front fog lamps
If you do not open a door after removing
the SmartKey from the starter switch, the
lamps will switch off automatically after
approximately 60 seconds.
146
i
You can reactivate this function within
ten minutes by opening a door.
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until the message
Hdlamp delay off
appears in the multifunction display.
The selection marker is on the current
setting.
Press button æ or ç to select
the desired lamp-on period.
You can select:
0 sec.
, the delayed shut-off feature
is deactivated.
Lighting
15 sec.
or
60 sec.
lamp-on period.
Turn the exterior lamp switch to
position U before turning off the
engine ( page 110).
The headlamps delayed shut-off
feature is activated.
,
30 sec.
,
45 sec.
, select the desired