Mercedes-Benz 2005 C 230 Kompressor Operator's Manual page 388

3 Bulb socket for turn signal lamp bulb
4 Bulb holder of low beam bulb
5 Bulb holder of high beam bulb
6 Bulb socket for parking and standing
lamp bulb
Low beam bulb
Turn housing cover 1 counterclock-
wise and remove it.
Turn bulb holder 4 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 4.
Insert the new bulb so that its socket
locates in the recess of bulb holder 4
and is level to it.
Reinsert bulb holder 4 with the bulb in
the lamp and turn clockwise.
Align housing cover 1 and turn it
clockwise.
Practical hints
Replacing bulbs
High beam bulb
Turn housing cover 2 counterclock-
wise and remove it.
Turn bulb holder 5 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 5.
Insert the new bulb so that its socket
locates in the recess of bulb holder 5
and is level to it.
Reinsert bulb holder 5 with the bulb in
the lamp and turn clockwise.
Align housing cover 2 and turn it
clockwise.
387