Loading; Roof Rack; Split Rear Bench Seat - Mercedes-Benz 2005 C 230 Kompressor Operator's Manual

Controls in detail

Loading

Roof rack*

Warning!
Use only roof racks approved by
Mercedes-Benz for your vehicle model to
avoid damage to the vehicle. Follow manu-
facturer's installation instructions.
1 Fastening points
2 Rubber strip
250
Mount the roof rack only between the
fastening points 1 and in the recess
of the rubber strip 2.
G
Secure the roof rack according to
manufacturer's instructions for
installation.
!
Load the roof rack in such a way that
the vehicle cannot be damaged while
driving.
Make sure
you can fully raise the tilt/sliding
panel*.
you can fully open the trunk lid.

Split rear bench seat

To expand the cargo area, you can fold
down the left and right rear seat backrests.
The two sections can be folded down
separately.
Warning!
When expanding the luggage compartment,
always fold the seat cushions fully forward.
Unless you are transporting cargo, the back-
rests must remain properly locked in the up-
right position.
In an accident, during hard braking or sud-
den maneuvers, loose items will be thrown
around inside the vehicle, and cause injury
to vehicle occupants unless the items are
securely fastened in the vehicle.
G