Maintenance; Mains Plug Replacement; Technical Data - Black & Decker KS900E Instruction Manual

ENGLISH

Maintenance

Your Black & Decker tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous
satisfactory operation depends upon proper tool
care and regular cleaning.
•
Regularly clean the ventilation slots in your
tool using a soft brush or dry cloth.
•
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner. Never let any liquid
get inside the tool and never immerse any
part of the tool into liquid.

Mains Plug Replacement

If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead to the live terminal of
the new plug.
•
Connect the blue lead to the neutral terminal.
•
If the product is class l (earthed), connect the
green / yellow lead to the earth terminal.
Warning! If your product is class ll double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs.
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
12
Batteries
At the end of their useful life, discard
batteries with due care for our
environment:
•
Do not short-circuit the battery terminals.
•
Do not dispose of the battery(s) in a fire as
this may result in a risk of personal injury or
an explosion.
•
Run the battery down completely, then
remove it from the tool.
•
Batteries are recyclable. Place the battery(s)
in a suitable packaging to ensure that the
terminals cannot be short-circuited. Take
them to any authorised repair agent or a local
recycling station.

Technical data

Voltage
Rated input
No-load speed min
Max. depth of cut
Wood
Steel
Aluminium
Weight
(with laser)
KS900E
KS900EL
Vac 220-240
W 600
-1
800-3000
mm 85
mm 5
mm 15
kg 2.36
kg 2.66