Toshiba Satellite A40 Series Maintenance Manual page 356

4 Replacement Procedure
Fasten screws of the PCB and bezel
1. Fasten four screws on the left edge in the order (5), (6), (7), and (8) shown in Figure
4-73.
2. Fasten four screws on the right edge in the order (1), (2), (3), and (4) shown in Figure
4-73.
CAUTION: Fasten the screws in the orders shown in Figure 4-73. No loose fastening is
allowed.
The tightening torque must not exceed 0.147
eight screws.
For the Philips screwdrivers, use an insert bit of point size 0.
5
6
7
Figure 4-73 Replacing 14 Inch TMD fluorescent lamp (11)
4-90
Fasten the eight M2 × 2.2
ネジ （Ｍ ２ Ｘ ２ ． ２ ） ８箇所 しめる
screws.
8
4.26 Fluorescent lamp
Ｎ･ ･
m (1.5kgf cm) for all the
1
2
Satellite A40 Maintenance Manual (960-458)
3
4