Toshiba Satellite A40 Series Maintenance Manual page 223

4 Replacement Procedures
3. Remove the following screws and pull the tab of the HDD pack to remove it. Be
careful not to damage the connector.
• M2.5×4B
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
4. Remove the following screws.
• M3×4S
5. Detach the HDD from the HDD bracket.
CAUTION: Do not apply pressure to the top and bottom of the HDD.
M3×4S FLAT HEAD
Figure 4-5 Detaching the HDD bracket and HDD
4-14
FLAT HEAD screw
FLAT HEAD screw
HDD bracket
×1
×4
HDD
M3×4S FLAT HEAD
Satellite A40 Maintenance Manual (960-458)
4.5 HDD