4.24 LCD cable/Sensor switch/Wireless LAN antenna
7. Remove the hinge cap (on the other side).
Figure 4-42 Removing the hinge cap (on the other side)
8. Peel off the five acetate tapes on the front (figure4-43) and one acetate tape
(figure4-41) on the back fixing the wireless LAN antenna cable.
9. Peel off both the wireless LAN antennas and pull out the cables through the hole
under the hinge cap.
Acetate tape
Wireless LAN antenna
Figure 4-43 Removing the wireless LAN antenna
Satellite A40 Maintenance Manual (960-458)
4 Replacement Procedures
Hinge cap
Acetate tape
Acetate tape
4-63