Field Name
Status
Server Address
Server Port
Account
Password
Phone Number
Local Port
Voice Mail Number
Voice Mail Text
Echo Test Number
Echo Test Text
Refresh Time
Enable Registration
Enable G.729AB
8.3.3.3 STUN Config
STUN support is configured in this page.
STUN – Simple Traversal of UDP through NAT – A STUN server allows a phone in a private
network to know its public IP and port as well as the type of NAT being used. The phone can
then use this information to register itself to a SIP server so that it can make and receive calls
while in a private network.
Shows registration status. Will show "Registered" if registered
or "Unapplied" if not registered.
IAX2 server address.
IAX2 server port. Default is 4569.
IAX2 account name for registration
IAX2 registration password.
IAX2 phone number (usually the same as IAX2 account name).
IAX2 local port. Default is 4569.
Voice mail number.
Voice mail name.
If the IAX2 server supports echo test and the echo test number is
non‐ numeric, this number can be used to replace the echo test
text. This allows dialing a number to perform an echo voice test.
This function is provided to test whether communication through
the server.
Echo test text
Expiration time of IAX2 server registration. Allowed values are
between 60 and 3600 seconds.
Enable/Disable IAX2 registration.
Enable/Disable G.729 codec.
46/81
Explanation