Table of Contents
Advertisement
10. Press Enter to select WAN Settings.
11. Scroll down to "2 Static IP Settings."
12. Press Enter.
13. Use the keypad to enter the IP Address.
14. Press Save softkey.
15. Press Down key.
16. Use the keypad to enter the Subnet Mask.
17. Press Save softkey.
18. Press Down key.
19. Use the keypad to enter the Gateway Address.
20. Press Save softkey.
21. Press Down key.
22. Use the keypad to enter the DNS 1 Address.
23. Press Save softkey.
24. Press Down key.
25. Use the keypad to enter the DNS 2 Address if desired.
26. Press Save softkey.
27. Press Back softkey.
28. Press up/down key to scroll to "1 Connection Mode."
29. Press Enter.
30. Use vol‐/vol+ to select "Static IP."
31. Press Save softkey.
32. Press Back or Exit 6 times to return to idle screen.
33. Disconnect and reconnect the power supply so the phone will reboot and apply the new
settings.
2.2.3
DHCP Mode
1. Press the Menu softkey.
2. Scroll down to "3 Settings."
3. Press Enter.
4. Scroll down to "2 Advanced Settings."
5. Press Enter.
6. The LCD will display "Enter Password".
7. Input the password (default value is 123).
8. Press Enter.
9. Scroll down to "2 Network."
10. Press Enter.
11. Press Enter to select WAN Settings.
12. Scroll down to "3 DHCP Settings."
13. Press Enter.
14. Use vol‐/vol+ to enable or disable DHCP DNS.
15. Press Save softkey.
16. Press Down key.
17. Use vol‐/vol+ to enable or disable DHCP Time.
12/81
Advertisement
Table of Contents
