Screen Settings; Ring Settings; Ring Volume; Ring Type - Linkcom IP 340P User Manual

held.
d) Soft Key – Keys under the display
3. Use Up/Down key and Enter to select the key.
4. Use vol‐/vol+to select the function.
5. Press OK to save.
6. Use BACK or EXIT to return to idle screen.
6.2 Screen Settings
1. Press Menu ‐>Settings‐> Enter‐>Basic Settings‐> Enter‐>Screen Settings‐>Enter.
2. The following items can be set.
a) Contrast – Set the contrast of the LCD.
b) Contrast Calibration – Set the level of contrast that the current contrast setting
provides.
c) Backlight – Enable or disable LCD backlight.
3. Press OK to save.
4. Use BACK or EXIT to return to idle screen.
6.3 Ring Settings
6.3.1 Ring Volume
1. Press Menu ‐>Settings‐> Enter‐>Basic Settings‐> Enter‐>Ring Settings‐>Enter‐>Ring
Volume‐>Enter.
2. Use vol‐/vol+ to select the desired ring volume from the 9 choices. The phone will ring
at the selected volume shortly after it is selected.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
6.3.2 Ring Type
1. Press Menu ‐>Settings‐> Enter‐>Basic Settings‐> Enter‐>Ring Settings‐>Enter‐>Ring
Type‐>Enter.
2. Use vol‐/vol+ to select the desired ring type. There are 9 standard types and 3 user
types. The user type can be configured from the web interface. The phone will ring at
the selected type shortly after it is selected.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
6.4 Voice Volume
1. Press Menu ‐>Settings‐> Enter‐>Basic Setting‐> Enter‐>Voice Volume‐>Enter.
2. Use vol‐/vol+ to select the desired voice volume from the 9 choices.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
22/81