Table of Contents
Advertisement
transferred followed by "#" and press Send. After the third party answers, press XFER to
complete the transfer.
NOTE: Call waiting and call transfer must be enabled.
NOTE: The SIP server must support RFC3515.
3.7.3
Semi‐Attended Transfer
During a conversation, press the XFER key, dial the number to which the call is to be
transferred. Then press the Send softkey. When the third party phone begins to ring,
press XFER to complete the transfer.
NOTE: Call waiting and call transfer must be enabled.
3.8
3‐way conference call
1. Press the Conf softkey during an active call.
39. The first call will be placed on hold and dial tone will be heard.
40. Dial the number to be added to the conference.
41. Press Dial.
42. When the call is answered, press Conf to add the caller to the conference.
43. To release the conference, press Split.
3.9
Multiple‐way call
To add a fifth party to four active calls
1. Press Conf softkey or XFER softkey
2. Press OK
3. Enter the number
4. Press Dial and wait for the other party to answer.
5. Use the arrow keys to select a call.
4
Advanced Functions
4.1
Call pickup
This allows a third party to answer a call by dialing a code. For example: A calls B, but there
is no answer. C can go off hook, dial a code plus B's number, and pick up the call.
The following chart shows how to configure this in the dial peer screen.
*1* is the code. After saving the above configuration, C can dial *1* plus B's phone number
to pick up A's call. The prefix can be set to anything the user desires that does not interfere
with other dialing rules.
15/81
Advertisement
Table of Contents
