5.5
DND
If this function is enabled the new incoming calls will be rejected.
1.
Press Menu ‐>Features‐> Enter‐>DND‐> Enter.
2.
Use vol‐/vol+ to Enable.
3.
Use Up/Down key to access line setting.
4.
Use vol‐/vol+ to Enable.
5.6
Ban Anonymous
If this function is enabled, the phone will block calls with no Caller ID information.
1. Press Menu ‐>Features‐> Enter‐>Ban Anonymous Call‐> Enter.
2. Choose the SIP Account from which to Ban Anonymous Call.
3. Press OK
4. Use vol‐/vol+ to Enable.
5.7
Ban Outgoing
If this function is enabled, the phone cannot make outgoing calls.
Press Menu ‐>Features‐> Ban Outgoing‐> Enter.
5.8
Hotline
If you turn on automatically as you set the number of call setup time.
1.
Press Menu ‐>Features‐> Enter‐>Hotline‐> Enter.
2.
Use Up/Down key to select line.
3.
Use vol‐/vol+ to Enable.
4.
Use Up/Down key to access time setting.
5.
Use Up/Down key to access number setting.
5.9
Dial Plan
1. Press Menu ‐>Features‐> Enter‐>Dial Plan‐> Enter.
2. The following items in the dial plan can be enabled or disabled: Press # to Send, Timeout
to Send, Timeout, Fixed Length Number, Press # to Do BXFER, BXFER On Onhook, AXFER
On Onhook.
Note: It is recommended that Dial Plan be configured from the web interface.
5.10
Dial Peer
1. Press Menu ‐>Features‐> Enter‐>Dial Peer‐> Enter.
2. Select Add to enter the Edit interface, and input information.
Note: It is recommended that Dial Peer be configured from the web interface. Refer to
Section 8.3.3.4.
19/81