Track Scanning (Fast Fwd/Fast Rev); Setting And Storing Cue Points - American Audio Radius 2000 User Manual And Reference Manual

BASIC OpERATIONS (CONT.)
9. SCANNINg (fAST fORWARD / fAST REVERSE)
This function gives you a fast search through a track. Press the Search
ButtonS (16) for a fast forward or a fast reverse.
10. SETTINg and STORINg a CUE pOINT:
Setting A Cue Point:
A cue point is the exact point playback will begin when the play/pauSe But-
ton (13) is pressed. You may set your cue points anywhere in a track. You may
set up to three independent cue points per folder. Three cue points are stored
in the Bank ButtonS 1-4 (28). There are two (2) ways to set a CUE point as
detailed in figures 14 and 15.
1) You may press the in Button (15) on the fly (while the track is playing). This
will set a CUE Point without music interruption. Pressing the cue Button
(14) will now return you to the same point that you pressed the in Button
(15). You may now store this CUE Point in any of the Bank ButtonS 1-4
(28).
©
2) You may also use the jog Wheel (9) to set a cue point. While a track is
in PAUSE or CUE mode, use the jog Wheel (9) to scroll through a track
to find your desired starting point. Once you have found your desired posi-
tion press the play Button (13) to set your cue point. Pressing the cue
Button (14) or the in Button (15) will now return you to this exact point.
Figure 13
American Audio - www.AmericanAudio.us - Radius 2000™ Instruction Manual Page 20
®
Important Notice: When the Bank Button LED is flashing,
the unit will set the bank in point.
Figure 11
Figure 12