American Audio Radius 2000 User Manual And Reference Manual page 14

gENERAL fUNCTIONS AND CONTROLS (Cont.)
34
Figure 3
39 38 37 36 35
B. REAR pANEL (fIgURE 3)
34. pOWER CONNECTOR - This connection is used to connect your main power. Be sure that your
local power matches the unit's required power.
35. pOWER BUTTON - This button is used to turn your unit's power on and off.
36. RELAY JACk - With this jack you can connect two players and relay (flip flop) play. You can also
connect your unit to a compatible American Audio® mixer's CONTROL out, to use American Audio's
"Q" start fader control. This feature is only available on American Audio's "Q" series mixers.
37. AUDIO OUT R & L - Audio out signals. Connect stereo RCA cable's from the AUDIO OUT to a
mixer's LINE input.
38. HEADpHONE JACk & VOLUmE CONTROL - This jack is used to connect your headphones and
the volume control is for your headphones is located next to it. Set the volume control to the lowest
setting before connecting your headphones. Adjust the volume accordingly.
39. USB mIDI JACk - Use this jack to connect to a computer.
American Audio - www.AmericanAudio.us - Radius 2000™ Instruction Manual Page 14
© ®