Vfd Display - American Audio Radius 2000 User Manual And Reference Manual

gENERAL fUNCTIONS AND CONTROLS (Cont.)
57
56
55
54
C. VfD DISpLAY pANEL (fIgURE 4)
40. pAUSE INDICATOR - The pause indicator will glow when the unit is in pause mode.
41. CUE INDICATOR - This indicator will glow when the unit is in CUE mode and will flash every time
a new CUE POINT is set.
42. TOUCH INDICATOR - This appears when anything touches the jog wheel.
43. fOLDER DISpLAY - This indicates which folder you are in.
44. CHARACTER DISpLAY - This will display the name of the track and album when a Mp3 track is
playing.
45. Bpm mETER - This meter will display the BPM's of the current track.
AUTO Bpm - This will indicate that the AUTO BPM counter is active.
46. mEmORY BUCkET - This meter serves two functions.
1. The bucket outline indates your cue memory status. a full outline lets you know the cue memory is
full. Note: The scratch function will not work unless all the bars are full.
2. The five bars inside the bucket represnts the digital buffer. Each bar represents 2 seconds.
47. SD/USB INDICATOR - This indicates which port is active. Use the Sd card/uSB Selector (1)
to select your desired port.
48. TEmpO LOCk - This will indicate the Tempo Lock function is active.
49. pITCH INDICATOR - This meter will indicate how much pitch is either being applied or will be ap-
plied.
50. TImE BAR INDICATOR - This bar gives a visual approximation of a track's remaining time This
bar will begin to flash when a track is ending. The flashing bar is great reminder, that time is running
out to get that next track ready to go.
51. TImE mETER - These indicators will detail the current Minutes, Seconds, and Frames. The meter
will display either the elapse or remaining time of a track. The display time will depend on the se-
©
41 43
40
42
53
American Audio - www.AmericanAudio.us - Radius 2000™ Instruction Manual Page 15
®
44
52 51
45
46
50 49
47
48
Figure 4