To Stop Recording - Memorex MVR4051/MVR4052 Owner's Manual

RECORDING A TV PROGRAM
VHF/UHF/CATV CHANNELS
TV
VHF
2-13
UHF
14-69
3
Press the direct channel selection buttons or the
CHANNEL Up or Down button to select the channel
to be recorded.
1-9 Press 0 twice and then 1-9 as required.
Example: To select 2, Press "002".
10-12 Press 0 first and then the remaining 2 digits in
order from left to right.
Example: Press 012 for "12".
13-99 Press 2 digits in order.
Example: Press 22 for
"22".
100-125 Press the 3 digits in
order.
Example: Press 110
for "110".
4
Press the REC/OTR button.
" " will appear on the screen
for about 4 seconds and the
REC indicator will light.
NOTE: Since the VCR has its own TV tuner, it is not
actually necessary to have the TV turned on in
order to make a recording. Turning on the TV
merely allows confirmation of the proper channel
settings on your VCR.

TO STOP RECORDING

Press the STOP button to stop
recording.
" " will appear on screen for
about 4 seconds.
TO STOP RECORDING TEMPORARILY
Press the PAUSE/STILL button
to avoid recording unwanted
material. Press again or press
the REC/OTR button to continue
the recording.
4F21301A E P14-19
CATV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
CH 110
CH 110
19
" " will appear on screen for about 4 seconds and the
REC indicator will blink to continue pause mode.
NOTE: The pause function will be released after 5
minutes to prevent damage to the tape or the
VCR. The VCR will change to the STOP mode.
NOTE: AUTO REWIND FEATURE
This VCR will automatically rewind the tape
when the tape has ended (except during OTR
and TIMER REC). It will also eject the tape and
turn the VCR's power OFF.
RECORDING ONE PROGRAM WHILE
WATCHING ANOTHER
While the VCR is recording, press the TV/VCR selector
button to select the TV mode.
The TV/VCR indicator will go off and recording will
continue.
Select the TV channel you want to watch by using the
TV channel selector.
NOTE: Some CATV hookups do not permit viewing one
channel while recording another. See pages 12
and 13.
TO PREVENT AN ACCIDENTAL
RECORDING
After recording, break off the erase prevention tab if you
do not wish to record over the tape.
Erase prevention tab
TO RECORD AGAIN
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges of
the cassette housing.
Adhesive tape
6/26/02, 3:53 PM
Screwdriver
19