Mounting; Orientation; Rigging - Chauvet Slim PANEL TRI 24 IP User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 18
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The SlimPANEL TRI 24 IP may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
·
Make sure that the structure onto which you are mounting the product can support
the product's weight. Please see the
for weight information.
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for
this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
This product is for indoor or outdoor use (IP65). Do not expose to harsh or
excessively corrosive environmental conditions (whether indoors or outdoors),
including, but not limited to, extreme temperatures, humidity, atmospheric
conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock
and conditions which exceed the product's Ingress Protection ("IP") rating. Do not
submerge this product.
Bracket Adjustment
Mounting Bracket
Technical Specifications section of this manual
SlimPANEL TRI 24 IP User Manual (Rev. 6)