Access Mode - Option Audio Xyfi User Manual

Manual Connection
To be selected it you want to connect to a WiFi network with a hidden Network Name (SSID).
Important: If the WiFi network has a hidden Network Name, XYFI will not join automatically, even if the ''Smart Scan' is enabled.
If you want to connect to a WiFi Network using the manual connection, please fill in:
Network Name: Name of the WiFi network you want to join.
Security: Security standard being used of the WiFi network you want to join.
Password: Password of the WiFi network you want to join.
If you are connecting to a WiFi Network using the manual method, the below icon will be shown:

10.4 Access Mode

In order to increase the security level for the XYFI, you can set the default access mode, number of maximum users and a guest
Password:
Default Access Mode - Defines the access mode for a new device connecting to your XYFI:
1) Hotspot User: Typically, your own laptop and personal WiFi enabled devices (e.g. smartphone/tablet etc..) and a limited user
group that often connects to the XYFI.
2) Guest User: User/device needs to know the 'Guest Password' to access the internet (in addition to the SSID (Network Name) &
the Pre-shared Key (WiFi Password).
Guest Password - Creates additional security as all the users/devices with the access mode 'Guest User' have to enter the 'Guest
Password' before connecting to the Internet. Both text and numbers can be used. The 'Guest Password' is valid as long as you
wish, or until you change it.
10.5 Users & Devices
Number of Users:
You can allow access for a maximum of 8 users/devices connecting to your XYFI using WiFi.
Users & Devices:
Here you have the option of seeing which devices are currently connected/offline/blocked to your XYFI and edit/change the access
mode etc. for each device.
Colour codes in front of each device:
Green: This device is currently connected to your XYFI.
Grey: This device has previously connected to your XYFI, but is now offline.
Red: This device is blocked and will not be able to connect to your XYFI until you 'unblock' it.
Remove/block devices: The icon on the right enables you to remove, unblock/block a user/device.
In order to edit each device, please click on the 'pencil' sign:
Device Name: You can change the device name so that it is easy for you to see which user/device is connected.
Access Mode: Here you can change the access mode between 'Hotspot User' and 'Guest User'.
10.6 About XYFI...
Mobile Network Usage
Here you get an usage statistics overview of your XYFI.
Current Session: The time and amount of data downloaded/uploaded within this session.
Current Month: The time and amount of data downloaded/uploaded within this month. Monthly counter will automatically be reset
on the 1st of each month.
Total Usage: The total time and amount of data downloaded/uploaded.
It is possible to erase all the statistics back to '0', by clicking the 'Reset Statistics' button.
Note: The usage/time overview displays approximate values only.
Firmware Update
XYFI will automatically see if new firmware is available. You can choose to install the new firmware by clicking the 'Download & Install'
button.
Restart
It is possible to restart the XYFI if it freeze or is unresponsive.
You do this by clicking the 'Restart' button within the administration pages.
Restore
It is possible to restore the XYFI to its default/factory settings.
You do this by pressing the LED/WPS ('side') button on the actual XYFI device and then plugging it into a power outlet. The
LED/WPS button must be kept pressed until it is restored.
Another possibility is to do this via the administration pages.