KVH Industries TracVision A5 User Manual page 98

INPUT Button Not Set to Satellite Source
If satellite programming is not displayed on your TV,
you may have selected an alternate video input. Press
the remote control's INPUT button until the correct
satellite input is displayed.
You can disable the INPUT button by
turning it off via the menu system. See
Section 8-6, "Setting System Preferences,"
on page 8.11 for details.
Audio/Video System Not Set Up Properly
If satellite programming is not displayed on your TV,
you may have the wrong input selected on your
audio/video system. Try switching to another input
(for example, VIDEO 1 or VIDEO 2; AUX1, AUX2, or
A/V) whichever input is assigned to the satellite
receiver. In addition, ensure that the audio/video
system is powered on.
54-0208
System Locked by Passcode
If you can only access Family list channels, and the
lock icon ( ) appears under the date/time, the
system has been locked with a passcode. For details
on unlocking the system, see Section 7-1, "Locking &
Unlocking the System," on page 7.3.
If the Family list does not have any
channels assigned to it, NO channels can
be viewed without first unlocking the
system.
Remote Control Not Programmed
If you are unable to operate a component with the
remote control, first ensure that the associated
component button (DVD, VCR, AUX, or TV) is
selected on the remote control. If the correct button is
selected, you need to program the remote control to
operate the component. See Section 3-2, "Programming
the Remote Control to Operate Other Components," on
page 3.9 for details.
Troubleshooting
10.7