Turning On The System - KVH Industries TracVision A5 User Manual

2-1

Turning On the System

To quickly start watching satellite TV using the
TracVision system, follow the simple steps below.
If you left the TracVision system ON when
you turned off your vehicle, TracVision will
automatically turn ON when you start up
your vehicle. DO NOT DO ANYTHING! Wait
30-60 seconds for the program guide to
load and you are ready to watch TV – if the
program guide does not load, go to step 6.
Turn on your car.
1
Ensure that the
2
receiver's power
switch is turned ON.
The light should be
lit.
Turn on your video screen and select the
3
satellite input (not the DVD/VCR input).
54-0208
If the TracVision system was left on when you
4
last turned off the vehicle, Message 1 then
Message 2 will appear on the screen:
Message 1
If your satellite dish is ready for DIRECTV
service, please wait until your
Advanced Program Guide
Installation
Searching for satellite signal...
Message 2
If your satellite dish is ready for DIRECTV
service, please wait until your
Advanced Program Guide
Installation
Acquiring guide data...
If the system was properly installed, you can
keep the TracVision system turned on and
not worry about draining your vehicle's
battery. The system will power off whenever
you turn off the vehicle.
Quick Start Guide
®
™
is prepared.
®
™
is prepared.
2.3