Advertisement
5.
On your TV note that a 3D Startup Message screen will appear immediately.
Note that you can skip the 3D Startup Message screen by pressing "OK" on your remote
control.
6.
The screen will then show a message saying that 'No Video Input Source Found'.
Your TV is now connected. It is now time to connect a Video Source!
3.4
Step 3: Connect the 3D Converter Box Input Device
1.
Connect one end of the second HDMI Cable to the HDMI Output port of your DVD
Player, Set-Top-Box, Gaming Device or other video device.
2.
Leave the input device switched off
3.
Connect the other end of this second HDMI Cable to the "HDMI 1" input port of the 3D
Converter Box.
8
Advertisement
Need help?
Do you have a question about the CMP-2DTO3DCONV and is the answer not in the manual?