Konig CMP-2DTO3DCONV User Manual page 23

5.8 Version Screen
Show the Hardware and Software and Product Number of this 3D Converter Box. May be
required if support is needed for your equipment.
6 Upgrading the 3D Converter Box
Contact your 3D Converter Box distributor or local retail shop to find out where to
download or access the latest USB Upgrade file for the 3D Converter Box.
The 3D Converter Box software can be updated by the user using a very simple procedure. All
you need is a USB Key (USB Stick) and a PC with an Internet Connection.
6.1 Find a New Upgrade File
Download the latest software and copy the latest 3D Converter Box file onto a standard USB key.
6.2 Upgrading the 3D Converter Box
1. Simply push the USB Key into the USB slot on the side of the 3D Converter Box .
2. The USB Upgrade begins immediately and will take about 20 seconds to complete.
3. When 5 LEDs have lit up the Upgrade procedure has completed successfully.
4. The USB Key must now be removed and the 3D Converter Box will return to normal
operation. (The USB Key must be removed after the upgrade or the 3D Converter Box
will not operate).
WARNING: Do Not Unplug the Power Cable from the 3D Converter Box during the
upgrade procedure as this can corrupt the software inside the 3D Converter Box
23