Black & Decker HS2400 User Manual page 5

Unpacking
Remove all packaging from the appliance,
N
Clean the appliance before first use.
N
Assembly
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.
Fitting the bowl assembly (fig. A)
Fitting the small bowl
Place the punched bottom plate (7) in the bowl (8).
N
Put the ingredients in the bowl.
N
Place the bowl on the drip tray (5).
N
Place the lid (9) on the bowl, aligning the handles.
N
Fitting the big bowl
The big bowl (10) always stands on top of the small bowl (8).
Place the punched bottom plate (11) in the bowl (10).
N
Put the ingredients in the bowl.
N
Remove the lid from the small bowl.
N
Place the big bowl on the small bowl.
N
Put the ingredients in the bowl.
N
Place the lid (9) on the bowl, aligning the handles.
N
Fitting the rice bowl
The rice bowl (12) should always be placed in the big bowl (10).
Put the ingredients in the rice bowl. Add water as necessary.
N
Remove the lid from the big bowl.
N
Place the rice bowl in the big bowl.
N
Place the lid (9) on the bowl, aligning the handles.
N
Use
Filling the water reservoir (fig. B & C)
Warning! Disconnect the appliance before filling the water
reservoir.
Open the water inlet (3).
N
Fill the water reservoir with cold water to the maximum
N
mark (13).
Close the water inlet (3).
N
Warning! Always check the water level in the reservoir
before using the appliance. Fill the water reservoir when the
water level is at the minimum mark (14).
Cooking (fig. A)
Place the bowl assembly (6), filled with ingredients, on
N
the appliance.
Fill the water reservoir.
N
Set the timer switch (1) to the desired cooking time.
N
The heater light (2) will illuminate.
If the desired cooking time is less than 15 minutes, first
N
turn the timer switch past the 15 minutes mark before
setting the time.
When the time has passed, the bell will sound and the light (2)
goes off.
Use oven gloves to take the bowl assembly off the appliance.
N
Carefully remove the lid (9) from the bowl.
N
Warning! Lift the lid away from your face and body to avoid
skin burns.
Cleaning, maintenance and storage
Warning! Before cleaning and maintenance, switch the
appliance off and unplug it.
Wash the removable parts in warm soapy water and dry
N
well.
Wipe the housing with a damp cloth. Do not use any
N
abrasive or solvent-based cleaner.
Warning! Do not immerse the appliance in water or any other
liquid.
Over a period of time, the drip tray and the base interior may
discolour. This is normal.
Cleaning the water reservoir
Fill the water reservoir with warm, soapy water.
N
Use a soft brush to clean the interior of the water reservoir.
N
Rinse the water reservoir with clean, hot water.
N
Cleaning the heating element
Make sure that the bowl assembly and the drip tray are
N
removed.
Fill the water reservoir with vinegar.
N
Set the timer switch (1) to 20 minutes.
N
Warning! Do not allow the liquid to boil over.
After the time has passed:
Rinse the water reservoir with clean, hot water.
N
Use a soft brush to clean the heating element.
N
Warning! Never clean the heating element immediately after
use as it may still be hot.
Storing the appliance
Fit the bowl assembly (6) and the drip tray (5).
N
ENGLISH
5