Table of Contents
Advertisement
System
Requirements
Installing a
Network Card
Before connecting the cable modem to your PC, make sure your system is equipped with a
LAN controller and supports the TCP/IP protocol.
If your system does not have an embedded LAN controller, you must install a network
interface card as instructed below (assuming that you are using the ASUS PCI-L101 Fast
Ethernet card under the operating system of Windows 98):
1. Install the PCI-L101 card on your
motherboard.
2. Power up your PC and follow the Add
New Hardware Wizard's instructions to
install the driver. When asked to restart
your computer at the end of the installa-
tion, click Yes.
3. After restarting the system, right-click
My Computer on the desktop, select
Properties, click the Device Manager
tab, and then double-click Network
adapters to confirm that the Ethernet
driver is properly installed.
Preparations
5
Advertisement
Table of Contents
