• Checking if TCP/IP is already installed
1. Click the Start button
desktop. In the Settings menu, select
Double-click the Network icon
• Adding TCP/IP in Network properties
1. Click Add.
After the TCP/IP protocol is installed, restart your computer and consult the installation
guide provided by your cable operator to complete TCP/IP configurations.
2. In the list of installed network compo-
nents try to find the TCP/IP protocol. It
may be followed by the name of the
Ethernet controller. If you cannot locate
anything that begins with TCP/IP, install
it as described below.
2. Double-click Protocol.
3. Select Microsoft from the
manufacturers. In the list
of network protocols
browse to TCP/IP and
then double-click it.