Table of Contents
Advertisement
Actiontec Wireless-Ready DSL Gateway User Manual
2. The "Select Upgrade File" screen appears. Click here (in the first paragraph of
the Select Upgrade File screen) to go to the Web page containing the link to
the upgrade file.
3. From the Web page, download the .tar archive file to the hard drive of the
computer.
4. In the Select Upgrade File screen, click Browse to locate the downloaded file
on the hard drive.
5. When the location of the downloaded file appears in "New Firmware Image"
text box, click Upgrade.
6. Read and follow the onscreen instructions.
Warning: Do not unplug the power cord from the Gateway
during the Upgrade Firmware process. Doing so may result in
permanent damage to the Gateway.
7. After the upgrade is complete, unplug the power cord from the Gateway, then
plug it back in again.
8. When the Power Light stops flashing and glows steadily green, the Gateway is
fully operational.
9. Reconfigure the Modem settings.
72
Advertisement
Table of Contents
