Table of Contents
Advertisement
Actiontec Wireless-Ready DSL Gateway User Manual
DSL Settings
To access
Settings, select
DSL
Gateway's
,
, Mode, and QoS (Quality of Service) settings can be changed
VPI
VCI
from this screen. Actiontec recommends not changing these values without con-
sulting the
.
ISP
Restore Default Settings
To restore the Gateway to its factory default settings, select Restore Default
Settings from the "Utilities" screen. When the "Restore Default Settings" screen
appears, click Restore Default Settings. Any changes made to the Gateway's settings
in the Custom Setup screens will be lost and the factory default settings will be
restored. During this process, the Gateway's Power
disabled.
Warning: Do not unplug the power cord from the Gateway
during the Restore Default Settings process. Doing so may result
in permanent damage to the Gateway.
When the Power Light stops flashing and glows steadily green, the Gateway is fully
operational.
Settings from the "Utilities" screen. The
DSL
70
flashes and the Gateway is
Light
Advertisement
Table of Contents
