Fisher & Paykel RS60RDWX1 Installation Instructions And User Manual page 11

Product installation
Your Wine Cabinet will arrive with the front feet raised to make moving the product into
● ●
its final location a simple task.
Avoid moving the product in a sideways direction as this may damage the floor
● ●
covering/surface.
Move the Wine Cabinet into its final position making sure there is correct clearances
● ●
between the product and surrounding cabinetry.
Levelling your wine Cabinet
It is important that all four corners of
● ●
the Wine Cabinet base are supported
firmly on the floor to eliminate any
cabinet movement.
Installing the appliance on a soft or
● ●
uneven/unlevelled floor may result
in twisting of the cabinet and poor
sealing of the door.
This Wine Cabinet has four adjustable
● ●
feet, which can be used to level the
appliance.
The front levelling foot on the hinge
● ●
side should take majority of the
cabinet's weight and be stable, ie the
cabinet should not rock or wobble.
Before placing wine in your wine Cabinet
Remove all internal packaging.
● ●
Clean the inside of the appliance to remove manufacturing and transportation dust.
● ●
Please refer to the 'Cleaning care' section of this user guide for further advice.
Allow the Wine Cabinet to run empty for 1 – 2 hours, this allows the appliance to
● ●
acclimatize and remove any residual odours before making temperature adjustments.
Energy efficiency
For the most energy efficient use of your appliance:
Ensure your Wine Cabinet has adequate ventilation as recommended in the installation
● ●
instructions.
Avoid overcrowding shelves, as this reduces airflow.
● ●
Keep door openings to a minimum.
● ●
INSTALLATION INSTRUCTIONS
Counter-clockwise
to raise feet
Clockwise to
lower feet
9