Please follow the installation steps below to ensure your appliance operates correctly.
Power
The appliance must be installed so the plug is accessible.
●
●
To ensure that the appliance is not accidentally switched off, connect your Wine Cabinet
●
●
to its own power point. Do not plug in any other appliance at this power point.
For power requirements, please refer to the serial plate located on the rear of the
●
●
cabinet.
It is essential that the appliance is properly grounded (earthed).
●
●
Connect the appliance to the electrical supply (220 V – 240 V 50Hz) with the fitted
●
●
plug and lead.
Connections to the mains supply should be in accordance with local regulations.
●
●
Location
Your Wine Cabinet should not be located in direct sunlight or next to any heat
●
●
generating appliance such as a cooktop, oven or dishwasher.
The appliance should not be located in garages or on carpeted floors.
●
●
This appliance is intended to be used in indoor ambient temperatures between 16°C
●
●
and 25°C. Do not operate this appliance outside the specified ambient ranges as
performance may be compromised.
This appliance is intended to be used in household and similar applications such as:
●
●
– Staff kitchen areas in shops, offices, and other working environments;
– Domestic farm houses and by clients in hotels, motels and other residential type
environments;
– Domestic bed and breakfast type environments;
– Domestic catering and similar non-retail/non-commercial applications.
Ventilation and installation
To ensure adequate ventilation for your Wine Cabinet, see recommended 'Product and
cabinetry dimensions'.
8
INSTALLATION INSTRUCTIONS