Panasonic CS-PS9JKT Service Manual page 68

5. Detach the Earth wire
Figure 3
AC303 (White)
RY-PWR connector
(Black and brown)
CN-PCFM
15.1.3 To remove discharge grille
7. Pull out the main
electronic controller
and power
electronic controller
halfway.
7. Remove screw to
remove terminal board
complete.
6. Detach the CN-DISP
connector then remove
the indicator complete.
Figure 5
Figure 6
9. Detach 4 connectors as labeled from
the electronic controller. Then pull out
main controller gently
12. Then pull the discharge grille
downward gently to dismantle it
68
Figure 4
10. Detach the AC303, RY-PWR and
CN-PCFM connectors from the
electronic controller. Then pull out
power electronic controller gently.
11. Pull out to remove the drain hose
from the discharge grille
CN-Data
CN-FB
CN-TH
CN-STM1