Bang & Olufsen BeoVision 10 Manual page 40

>> Connect and operate an audio system
Program the AV setup with Beo6
If your television has been set up in an
AV system, you may need to set it to the
correct Option with Beo6. Switch the
entire system to standby first.
Option setting for the television ...
> Place yourself in front of the television.
> While holding the • button, press the
centre button to bring up the Setup
menu on Beo6.
> Let go of both buttons.
> Press Option Pgm to bring up the Option
Programming display on Beo6.
> Press the button that matches the zone in
which the television is placed, for example,
Tv Area.
Option setting for the audio system ...
> Place yourself in front of the audio system.
> While holding the • button, press the
centre button to bring up the Setup
menu on Beo6.
> Let go of both buttons.
> Press Option Pgm to bring up the Option
Programming display on Beo6.
> Press the button that matches the zone in
which the audio system is placed, for
example, Audio Area.
40