Bang & Olufsen BeoVision 10 Manual page 13

What's on the AV1 – AV6 menus ...
SOURCE ... Select the source you have
connected. The option you select indicates
which remote control button switches on
the source. For example, a source
registered as V. MEM is selected on when
you press the V MEM button. A source
registered as DTV2 is switched on by
pressing LIST and then the navigation
button up or down to display DTV2 and
press the centre button. (Beo6: Press
DTV2). Options are:
NONE ... if nothing is connected.
V.MEM ... for a connected video recorder
or hard disk recorder. Only AV2–4.
DVD/DVD2 ... for a connected DVD player
or recorder.
DTV2... for other equipment, such as a
set-top box.
DTV ... for other equipment, such as a set-
top box.
V.AUX2 ... for other equipment, such as a
video game console.
TV ... occupied by the TV tuner, unless
you disable both tuners in the TUNER
SETUP menu.
PC ... for a connected PC.
DECODER ... for a connected decoder.
The source lists are divided into 4 groups;
'stb' are set-top boxes, 'dvd' are DVD
players and recorders, 'vmem' are video
recorders including hard disk recorders,
'other' are, for example, PCs and media
centres.
NAME ... Allows you to name the source
you are registering, the name you enter
appears in the on-screen display when you
activate the source.
(AUTO SELECTION) ... Allows a source
connected to AV5 to be selected
automatically as soon as the television
detects a signal, provided the television is
on at the time. Options are ON and OFF.
IR SOCKET ... Select which IR socket is used
for the source, options are PUC1, PUC2,
PUC3, PUC4 and NONE.
IR TYPE ... Select the type of IR connection
used. Options are PLUG (for a cable
connection) and IR (for an IR blaster
connection).
>> Register additional video equipment
HDMI ... Indicates whether or not the
equipment is connected to the television
via one of the HDMI sockets. Select the
appropriate socket: A, B, or C.
(YPbPr) ... Indicates whether or not the
equipment is connected to the television
via the YPbPr sockets. Options are YES
and NO. Can only be registered in one of
the AV menus (AV2-AV4 or AV6) at any time.
(VGA) ... Indicates whether or not the
equipment is connected to the television
via the VGA socket. Options are YES and
NO.
S/P-DIF ... Select the S/P-DIF connection
used. Options are 1, 2 and NONE.
An HDMI Expander must always be
connected to HDMI C, when present,
otherwise to HDMI B. When connecting an
HDMI Expander, additional HDMI sockets
become available; C1, C2, C3 and C4.
While it is possible to register equipment
under any of the available source types, the
type you select affects how you can use your
source.
13
AV2
SOURCE
NAME
IR SOCKET
IR TYPE
HDMI
Y/Pb/Pr
S/P-DIF
Regarding High Definition (HD) sources ...
SD signals can be recorded, as well as
distributed to a link room television, but HD
signals cannot.
Connect both the HD and the SD signals to
the television. The best signal is always used.
If no HD signal is available, the SD signal is
shown.
NOTE! If you have other equipment
connected to your television, set POWER
SAVING to OFF. See page 31 for further
information.
NONE
. . . . .
NONE
NONE
NONE
NO
NONE