Bang & Olufsen BeoVision 10 Manual page 23

>> Loudspeaker setup – BeoVision 10-40/46
Calibrate the sound level
When you have connected speakers in a
surround sound setup to the television,
you must perform a speaker calibration.
A calibration sound is produced
alternately in each of the speakers you
have connected in your surround sound
setup. Your task is to adjust the sound
level from all the connected speakers to
match the sound level from the centre
speaker. You can choose whether you
want the sound sequence to occur
automatically or manually.
Once you have performed your speaker
calibration, you will only need to re-
calibrate the speaker sound if you make
changes to the setup, for example, if
you move one or more of the speakers.
23
SPEAKER LEVEL
SEQUENCE MANUAL
LEFT FRONT .... . . . . . .
RIGHT FRONT .... . . . . . .
RIGHT REAR .... . . . . . .
LEFT REAR .... . . . . . .
To calibrate the sound level ...
> Bring up the TV SETUP menu and
highlight OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight SOUND.
> Press the centre button to bring up the
SOUND SETUP menu and highlight
SPEAKER LEVEL.
> Press the centre button to bring up the
SPEAKER LEVEL menu. SEQUENCE is
highlighted.
> Use the navigation button left or right to
choose between AUTOMATIC and
MANUAL.
> Use the navigation button left or right to
adjust the speaker sound and use the
navigation button up or down to move to
another speaker.
> When you have adjusted the sound for all
the speakers in your surround sound setup,
press the centre button to store or press
BACK to leave the menu without storing.