Before You Start - Lec CU 157 Operating Instructions Manual

GB/IE

Before You Start

Placement of the product
● Unpack the product; remove the tape securing the door and the accessories. Remove
the remains of the glue, if any, with delicate cleaning detergent.
● Do not throw the Styrofoam element of the packaging away. Should you have to
transport the product again, secure the freezer with the Styrofoam elements, the plastic
foil, and Scotch tape.
● Wash the inside of the freezer chamber and the accessories with lukewarm water
with some dishwasher liquid and then wipe it and dry.
● Place the freezer in a dry, ventilated place, out of sun, far from heat sources such
as central heating radiators, etc.
● If you place the freezer next to another refrigerating or freezing unit, the lateral
distance between the appliances should be at least 2 cm.
● Make sure the product is placed level adjusting two turn-in front feet of the freezer.
● Once placed, make sure the freezer is not standing on the power supply cord.
● CU 157, CU 157 S freezers are equipped with a top cover and are designed to fit
under 865 mm high standard work tops and benches.
● For easy opening of the refrigerator door the distance between the side (the hinges
side) and the room wall (or similar) should be at least 5 cm.
● Any modification of the refrigerating system is prohibited. Be especially careful not
to do any damage to the capillary tube (Photo 2 (1)) located in the recess next to the
compressors. The tube cannot be bent, straightened or coiled. Damage of the capillary
tube by the user waives the guarantee of the freezer.
▐
1
▼
2
6