Safety Measures - Lec CU 157 Operating Instructions Manual

GB/IE

Safety Measures

● The producer in not responsible for any damage resultant from violating the
principles in the manual. Thus, read carefully the information on safety measures,
operation, and maintenance of the freezer.
● Please keep the Manual for future use or for handing it over to the next user.
Before you turn the freezer on.
When placing, moving or lifting the freezer, do not hold the door handle, do not pull the
condenser at the back of the freezer, and do not touch the compressor unit.
● After placing the freezer, wait two hours before you turn it on, for it could have been
excessively tilted in transport.
● Before any maintenance activity, pull the plug out, do not pull the cord but hold
firmly the plug.
● Do not use double-wire extension cords; if an extension cord is necessary, make
sure it is a cord with protection safety certificate.
● If the main power supply cord is damaged, it should be replaced by a serviceman.
● Because of safety reasons, do not repair the appliance by your- self.
Repairs carried out by persons without proper qualifications can cause serious risk
of injury for the user.
● Do not store contents in glass bottles or containers in the freezer. The glass could
break.
● If the appliance is not to be used any more, make it completely safe prior to
scrapping by cutting the cord.
● Keep the packaging material (bags, Styrofoam pieces, etc.) out of reach of children.
● Should the refrigerating unit be damaged, air the room for a few minutes (the room
should have at least 4 cubic meters).
● The cooling agent can cause eye injury.
● The freezer should not be transpor-
ted, moved, or placed in horizontal po-
sition and tilted more than 40°. Should
such a situation occur, after placing
the appliance in the right position wait
at least 2 hours before turning it on.
Fig. 1
4