Switching Between Two Channels Using Channel Return; Switchingbetween Twochannels U Sing Surflock - Toshiba 50L1450U User Manual

Setting upyourTV 55
Favorites browser
NOTE If a digitalchannel i s notprogrammed, eitherthroughtheautomatic
channel s canortheChannel addfunction, s ee"AutoTuning"on page
42,youwill have totunetheRFchannel u singtheChannel N umbers
andthe(Bash 100) buttonontheremote control.
Switchingbetween twochannels u sing Channel R eturn
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1 Select the first channel you want to view.
2 Select a second channel using the Channel Number buttons
(and the (Dash 100) button if selecting a digital channel).
3 Press the CH RTN button on the remote control.
The previous channel will display. Each time you press the CH
RTN button, the TV will switch back and forth between the last
two channels that were tuned.
NOTE If youpress theCHRTNbuttonfroma non-antenna i nput,theTV
will returntothelast-viewed input.
Switchingbetween twochannels u sing SurfLock
T M
The SurfLock
TM
feature temporarily "memorizes" one channel to
the CH RTN button, so you can return to that channel quickly from
any other channel by pressing the CH RTN button.
To memorize a channel to the CH RTN button:
1 Tune the TV to the channel you wish to program into the CH
RTN button.
2 Press and hold the CH RTN button for a few seconds until the
message "Memorized" appears on the screen. The channel has
been prograimned to the CH RTN button.
3 You can then change channels repeatedly, and when you press
the CH RTN button, the memorized channel will be tuned.
The TV will return to the memorized channel one time only. Once
you press the CH RTN button and then change channels again, the
CH RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last two
channels that are tuned.This feature also works for external inputs.