Toshiba 50L1450U User Manual page 43

SettingupyourTV 43
To program channels automatically:
1 Configure the antenna input source, if you have not already
done so, see "ANT/CABLE IN" on page 41.
2 Press the MENU button and open the Installation menu.
3 Highlight Channel Tuning, and then press the ENTER button.
(Sample Image) Setup metal - Instalh_ttion selection
4 Highlight Auto Tuning, and then press the ENTER button to
open the Channel Program menu to begin channel
progrannning.
(Sample Image) Installation metal - Channel selection
The TV will automatically cycle through all the antenna/cable
channels, and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
"Scanning channels, please wait" appears.
To cancel channel progrannning, press the EXIT button on the
remote control or highlight Cancel in the on-screen display,
and then press the ENTER button.
When channel programlning is complete, press the CH A/Y
(arrow) buttons to view the programlned channels.